Products

All categories

Sales Department1

binghan

Tel: +86-0311-84396930

Phone:+86-18631134999

Fax：+86-0311-843969850

E-mail:sales@qunfengglobal.com

Sales Department2

han

Tel: +86-0311-84396933

Phone:+86-13832332178

Fax：+86-0311-843969850

E-mail:sale1@qunfengglobal.com

Web Address：www.qunfengglobal.com

Trunk type discharge wire machine

The trunk type discharge wire machine can be used for the coiling of metal wire components. It can automatically adjust the winding tension during the take-up process, and can adjust the wire walking pitch according to the wire diameter to make it take up The line speed of the line is coordinated with the previous process, and the steel wire rods of the take-up line are tightly wound, and the appearance of the wire rods is neat and beautiful.

SEND E-MAIL

MESSAGES

Product description

Parameters

Operation and precautions of trunk type discharge wire machine
1. Operation: After the steel bar passes through the arranging roller, the end of the thread is inserted into the inner edge of the spool. Then press the "total point" switch to tighten the steel bar, start operation and production.
2. Matters needing attention:
1). The take-up tension of the horizontal steel rebar take-up machine for the spool should be adjusted according to the product specifications, but the high tension current cannot exceed 60A.
2). The bearing parts should be cleaned regularly and coated with calcium-based grease.
3). The reducer of the arranging mechanism should be carried out in accordance with the maintenance and lubrication requirements of the reducer

Technical parameter